$16.06 USD
Shipping calculated at checkout.
OEM Part Number: AN126451
Condition: New old stock (NOS), unless a product-specific condition note states otherwise.
Fitment: Confirm the OEM part number and application before ordering. Existing verified catalog fitment and factory schematic information remain attached to the product.
Inventory notice: Dealer-managed stock is confirmed from the latest accepted inventory feed and is not charged until fulfillment is confirmed.
Image notice: Product photo pending. The Iron Vault Industries logo is shown as a placeholder.
Offered through Iron Vault Industries.
Technical details
- The dated AN126275-AN126586 drawing lists AN126451 as a straight stud with overall length L of 3.500 +/-0.010 in, matching the federal range of 3.490-3.510 in.
- The two right-hand thread ends have different pitches: the stud end is 5/16-18 special UNS, and the nut end is 5/16-24 UNF-3A.
- AN126451 is in the drawing's +0.003 in oversize column. Its stud-end pitch diameter after plating is 0.2840-0.2855 in; the separate before-plating range is 0.2835-0.2850 in.
- The exact drawing row specifies minimum full-thread lengths A of 0.844 in at the stud end and B of 0.625 in at the nut end; full or imperfect thread limits are separate drawing requirements.
- The dated design specifies steel to AMS 6322. The exact federal record identifies steel composition 8740; supplied-lot material conformity is unverified.
- The dated design specifies Rockwell C26-C32 hardness and cadmium plating to AMS 2400. Drawing dimensions apply after plating except where expressly noted.
- The drawing and federal record identify surface finish of 32 microinches for both threaded ends and 63 microinches for the shank.