Technical details

• Hi-Shear drawing HL112 revision 29 identifies this designation as a 1/64 in oversize titanium HI-LOK pin with a protruding tension head.
• Dash 16 replaces a 1/2 in nominal pin. The oversize row gives 33/64 in nominal diameter and head diameter A 0.717 to 0.770 in.
• Shank D is 0.5146 to 0.5151 in without coating or solid film and 0.5141 to 0.5151 in after coating or solid film. The drawing allows a 0.0002 in increase in maximum D for solid film or aluminum coating.
• Grip dash 26 denotes 1.625 in maximum grip under the drawing ordering rule.
• The selected diameter row specifies a modified 0.5000-20 UNJF-3A thread.
• The drawing specifies 6Al-4V titanium alloy to AMS 4928 or AMS 4967.
• Finish code VF specifies blue Type I anodizing to Hi-Shear Specification 306 and cetyl alcohol lubricant to Specification 305.